Customization: | Available |
---|---|
Type: | Steel Plate |
Standard: | ASTM |
Still deciding? Get samples of US$ 80/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Annealing hardness HBS |
Cold pull hardness HBS |
Preheating temperature ºC |
Quenching temperature ºC |
Holding time min |
Hardening medium | Temper temperature ºC |
After tempering hardness ≥HRC |
|
salt-bath furnace | controlled atmosphere furnace | |||||||
235 | 262 | 788 | 1191 | 1204 | 5~15 | air cooling | 522 | 60 |
Steel plate/Sheet thickness / mm |
σb MPa |
σs ≥/MPa |
δ Samples from the standard for 50 mm (2 in) |
180 ° of cold bending test | |
longitudinal | horizontal | ||||
Hot-rolled/Cold rolling:5 - 150 | 520 | 415 | 16~18 | 2a | 3.5a |
Note: (1) listed in the table apex diameter (d), to steel thickness (a) multiples said. (2) in the ASTM A6 standard specified scope can meet any additional conditions. (3) from the standard for 50 mm (2 in). Mechanical properties Mechanische Eigenschaften Caracteristiques mecaniques ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d'elasticite minimale Rm Tensile strength / Zugfestigkeit / Resistance a la traction A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.5-0.6 | 0.75-1.1 | 0.2-0.5 | 0.03 | 0.03 | 4.75-5.5 | |
Mo | Al | W | Nb | Ti | V | Ce |
1.15-1.65 | 1.0-1.5 | |||||
N | Co | Pb | B | Other | ||