Customization: | Available |
---|---|
Type: | Round |
Standard: | DIN |
Still deciding? Get samples of US$ 80/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
DIN | EN | ANFOR | AECMA |
1.5815 | 35NiCr6 | 35NC6 | FE-PL62 |
C | Mn | Si | P | S | Cr | Ni |
0.30-0.37 | 0.60-0.90 | 0.40 max | 0.025 max | 0.025 max | 0.80-1.10 | 1.20-1.60 |
Process | Diameter(mm) | Tensile Strength Rm (Mpa) | Yield Strength Rp0.2 (Mpa) | Elongation A5 (%) | Area Reduction Ratio C (%) | Impact Value Kv (J) Room Temperature | Hardness (HB) |
SOFT ANNEALED | / | / | / | / | / | / | 223 max |
QUENCHED AND TEMPERED | 16 max | 880-1080 | 740 min | 12 min | 40 min | / | 261-318 |
QUENCHED AND TEMPERED | 16-40 | 880-1080 | 740 min | 12 min | 40 min | 35 min | 261-318 |
QUENCHED AND TEMPERED | 40-100 | 780-980 | 640 min | 15 min | 40 min | 35 min | 231-289 |
Process | TEMPERATURE °C | Cooling Medium |
Hot plastic deformation | 850-1100 | / |
Normalization | 850-880 | air |
Soft annealing | 640-690 | air |
Hardening | 840-860 | oil |
Tempering | 530-630 | air |